Im) identify mode for multiple users, L) line style, Pa) pass-through – Pointmaker PVI 65 User Manual
Page 99
Boeckeler Instruments, Inc.
Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 89
Section Six: Commands for RS-232 Control
Commands
(IM) Identify Mode for Multiple Users
The “IM” command designates the mode to use when multiple digitizing tab-
lets or touch screens are installed. When PRIORITY USER mode is selected,
users will also need to send the command designating which controller
(COMM #) is the priority user.
(L) Line Style
The “L” command determines the line style to use when drawing a freehand
line, straight line or frame.
(PA) Pass-through
The “PA” command enables the video image to “pass-through” the system
without displaying the marker overlay.
<Esc>(ICXXX
Increases brightness level (relative). XXX is numeric value
between -256 and 256.
<Esc>(IC-XXX
Decreases brightness level (relative). XXX is numeric value
between -256 and 256.
<Esc>(IMO
Assigns Open Mode.
<Esc>(IMS
Assigns Selective Mode.
<Esc>(IMP
Assigns Priority User Mode.
<Esc>(IMCXX
Sets COMM port for Priority User.
XX = the COMM port (01-10) The port selected should be con-
nected to a digitizing tablet or touch screen.
<Esc>(LF
Fine or thin line.
<Esc>(LSF
Fine or thin line with drop shadow.
<Esc>(LM
Medium line.
<Esc>(LSM
Medium line with drop shadow.
<Esc>(LB
Bold line.
<Esc>(LSB
Bold line with drop shadow.
<Esc>(PA1
Enable pass-through. (overlay is hidden)