Pointmaker PVI 65 - Manual (Page 74)

Page 64 - Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker Boeckeler Instruments, Inc.
Assigning Marker Appearance Section Five: Using Markers
Assigning Line Styles
You can have drawn lines of different styles on a single overlay. Once you
draw the line, or anchor a straight line, you cannot change that line style. How-
ever, you can erase or undo the drawing and begin again. (See “Clearing
Markers” on page 75)
You can change line style directly from the digitizing tablet or from the key-
board. You can also change the line style from other devices by accessing the
menu system. When the keyboard is installed, you can only access the menu
system from the keyboard.
From Digitizing Tablet
1. Click the pen tip on the desired line style icon on tablet.
All lines drawn from this point on will appear in the newly selected
line width and style.
From the Keyboard
1. Activate the Line Style command. (see “Quick Reference for Keyboard”
in “Appendix” on page A-6)
A small sample of the active line style will appear briefly in the
lower-right hand corner of the screen.
2. Repeatedly activate the Line Style command until the desired line
style appears in the on screen sample.
You can scroll backwards through the line options, by activating the
Reverse Toggle command.
All lines drawn from this point on will appear in the newly selected
line width and style.
From the Menu System
(See “Selecting a Line Style“ in “Section Two: Annotation Menu” on
page 33)