Televes DigiSlot DVB-T modulator, wall mount - Manual (Page 8)

DVB-T Modulator
8
4. Encoders
Ref. 554801 – 1 A/V Input (MPEG2)
CVBS L ---- Audio ---- R
1 2
(1) CVBS input (video input)
(2) Unbalanced audio input (left and right)
Ref. 554802 – 2 A/V Inputs (MPEG2)
CVBS L ---- Audio ---- R CVBS L ---- Audio ---- R
1 2
1 3 2 4
(1) CVBS input (video input) –Channel 1
(2) Unbalanced audio input (left and right) –Channel 1
(3) CVBS input (video input) –Channel 2
(4) Unbalanced audio input (left and right) –Channel 2
Ref. 554803 – 1 HDMI Input (MPEG4)
HDMI1 HDMI2
1 2
(1) HDMI input –Channel 1
(2) HDMI input –Channel 2
Input resolutions: 1280x720p60, 1280x720p50, 1920x1080i60, 1920x1080i50,
1920x1080p60, 1920x1080p50
Note: It is only possible to obtain on the output the signal of one input at a time.
When both inputs have signal at the same time, the signal on the output is
the one of HDMI1(if HDMI input is set in automatic see chapter 5.2, otherwise
the output will be from the input selected).
Note: 3D signal from Blu-ray 3D is not supported.
Ref. 554804 – 2 HDMI Inputs (MPEG4)
HDMI1 HDMI2
1 2
(1) HDMI input –Channel 1
(2) HDMI input –Channel 2
Input resolutions: 1280x720p60, 1280x720p50, 1920x1080i60, 1920x1080i50,
1920x1080p60, 1920x1080p50
Note: 3D signal from Blu-ray 3D is not supported.
Ref. 554812 – 2 CVBS/YPbPr/S-Video inputs (MPEG2)
CVBS L----Audio----R S-Video L----Audio----R
1 2
S-Video CVBS
Y Pb Pr Y Pb Pr
1 2
(1) CVBS / YpbPr / S-Video inputs – Channel 1
(2) CVBS / YpbPr / S-Video inputs – Channel 2
Input resolutions YPbPr: 720x480 60i, 720x576 50i
Ref. 554813 – 1 HDMI Input (MPEG2/MPEG4)
HDMI1 HDMI2
1 2
(1) HDMI input (video MPEG2/4, audio MPEG-2, MPEG-2 AAC, MPEG-4 AAC - Channel 1
(2) HDMI input (video MPEG2/4, audio MPEG-2, MPEG-2 AAC, MPEG-4 AAC - Channel 2
Input resolutions: 1280x720p60, 1280x720p50, 1920x1080i60, 1920x1080i50,
1920x1080p60, 1920x1080p50
Note: It is only possible to obtain on the output the signal of one input at a time.
When both inputs have signal at the same time, the signal on the output is
the one of HDMI1(if HDMI input is set in automatic see chapter 5.2, otherwise
the output will be from the input selected).
Note: 3D signal from Blu-ray 3D is not supported.