User description, Writing device settings – Televes Coaxdata 1Gbps-HDTV COAX+PLC 1ETH+1SFP User Manual
Page 12
CoaxManager
™
User Guide
12
Be careful and don't forget the password to connect with devices later.
In case you have forgotten the password, you have a button on the front
of the device called
Factory Defaults Button
that allows the device
restored to factory settings and reset network key as the default key,
HomePlugAV.
User Description
Description that user wants to assign to the device. Descriptions can be set to what makes sense for
the installation and the location of the modem, its role in the network or the user who is using it.
Writing Device Settings
Once the user has configured CoaxDATA modem with the appropriate values,
Write Config Button
write configuration on device. Configuration is stored in a memory area dedicated to
user settings
.
If you have issues about setting up or want to delete, Press Factory Default Button to restore the device
to the factory, eliminating user settings.
When writing the configuration to a remote device connected through
the coaxial, be careful if you change the network key, Network
Password, since when change key, change network membership and can
not reconnect to device remotely.
By changing the network key loses connectivity via coaxial and
reconfigure device will have to do well locally, connecting in the place
where it is installed, or set as network key local device the same as the
remote device. The same also applies if you change the transmission
mask or MxU master/slave mode.
EN