Televes Coaxdata 1Gbps-HDTV COAX+PLC 1ETH+1SFP - Manual (Page 27)

Televes
®
27
Factory Defaults Button
This option allows you to disable the front button that resets the device to factory settings.
Use is limited to cases where the installer wants
CoaxManager configuration not be deleted by the
client when press the button.
This option increases product security, when
disable factory button it is impossible to use it to
delete user settings when press.
Although button is disabled, the Factory Default option on
CoaxManager through GUI interface is still running and
you can set the factory settings by cliking button on
application.
Advanced Power Management
This option enables the low power mode on the device, allowing greater energy efficiency. The low
power mode is activated when no device connected to the host, or when even if there is connection to
PC not transmit data over a long period.
The following table shows the energy savings achieved when activated low power mode
Power
CoaxDATA 200Mbps
(Watts)
Power
CoaxDATA 1Gbps
(Watts)
Normal Working 4.5Watts 6Watts
Low Power Mode
1.8 Watts 1.8 Watts
This option is only available on HomeNetworking mode and firmware versions that support it. In MDU
mode this option is not available since some programs like AccessControl™/CoaxManager™ not
function correctly when trying to connect to a remote device.
Advanced MME Features
Tab provides options that affect the management protocol that is used to configure the devices
CoaxManager named MMEs (Management Messages).
 Enable VLAN Tag MMEs : This option enables use of VLAN tags for receiving and sending
messages on the device MMEs. Use this option when the operator has a specific VLAN for
network management, or when you simply want to use a different VLAN for management.
VLAN ID used in responses (MME Response) is the same as that used in the requests
(Requests MME). VLAN used on indication messages, messages that emits an informative
request (MME Indication), is set on VLAN ID field on GUI.
EN
www.televes.es