Controls & functions, Rear – TVLogic LVM-091W-3G User Manual
Page 10
10 Multi Format LCD Monitor
3. Controls & Functions
REAR
• [REMOTE] (RJ-45)
- Provides connection to control equipment for
external monitor control.
- Features can be changed in the REMOTE
section of OSD menu.
• DC POWER IN (XLR 4P)
- DC power input terminal for DC 12/24V.
* When using a DC Adapter other than the one
supplied by the manufacturer, please be
advised that the adapter with DC 12V/3A ~ 6A
can be compatible with the monitor.
<Warning!!>
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel. And
the connected devices such as camera or video
source player may also be influenced through
signal cable. Please check if the AC power source
and the power extender or power distributor is
grounded.
DC IN
socket
1: GND
4: +12V/
+24V
1
2
3
4
Connector Composite Component
S-Video
1
CVBS1
Pb
No Con.
2
CVBS2
Y
Y
3
CVBS3
Pr
C
• [TALLY] Lamp
- Interlocks with front tally lamp.
• [SDI-IN A] (BNC)
- HD/SD SDI signal input terminal for SDI A.
• [SDI-OUT A] (BNC)
- HD/SD-SDI signal output terminal for SDI A
signal.
• [SDI-IN B] (BNC)
- HD/SD SDI signal input terminal for SDI B.
• DVI DIGITAL/DVI ANALOG (DVI-I)
- Input connection for DVI digital/analog.
• CVBS1/G/Y/S-Y (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 1, S-VIDEO Y,
COMPONENT Y and RGB G signals.
• CVBS2/B/Pb (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 2, RGB B and
COMPONENT Pb signals.
• CVBS3/R/Pr/S-C (BNC)
- Signal input terminal used to feed the
monitor COMPOSITE 3, S-VIDEO C,
COMPONENT Pr and
RGB R signals.
• AUDIO IN (phone jack)
- Internal speakers stereo audio input terminal.
• AUDIO OUT (phone jack)
- Built in audio disembedder and internal
speakers stereo audio output using
mini jacks.
• FACTORY PGM (40 pins)
- Input connector for FACTORY PGM allowing
for firmware update and auto calibration.