TVLogic LVM-091W-3G - Manual (Page 19)

Multi Format LCD Monitor 19
• C Min
- Used to set the minimum chroma(C’) level from
0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and displayed as red on
the Waveform.
• Y Picture Blink
- Used to set whether or not to blink pixels with
values exceeding Y MAX and Y MIN.
•
C Picture Blink
- Used to set whether or not to blink pixels with
values exceeding C MAX and C MIN.
• Range Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in Waveform/Vectorscope.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds the
selected values of Y MAX, Y MIN, C MAX and C
MIN shall blink.
* See section “7. Other Function -> [9] Range
Error” for more information.
• Y Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen, and displayed as red on
the Waveform.
• Y Min
- Used to set the minimum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen, and displayed as red on
the WaveForm.
• C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and displayed as red on
the Waveform.
[5] Waveform
5. Menu Operations