D-Link KX-TDA100 User Manual
Kx-tda100, Kx-tda200, Installation manual
Advertising
Table of contents
Document Outline
- System Components
- Important Safety Instructions
- Precaution
- Introduction
- Precautions for Users in the United Kingdom
- Table of Contents
- System Outline
- Installation
- 2.1 Before Installation
- 2.2 Installation of the Hybrid IP-PBX
- 2.2.1 Unpacking
- 2.2.2 Names and Locations
- 2.2.3 Opening/Closing the Front Cover
- 2.2.4 Installing/Replacing the Power Supply Unit
- 2.2.5 Frame Earth Connection
- 2.2.6 Backup Batteries Connection
- 2.2.7 Installing/Removing the Optional Service Cards
- 2.2.8 Types of Connectors
- 2.2.9 Attaching a Ferrite Core
- 2.2.10 Fastening Amphenol Type Connector
- 2.2.11 Wall Mounting (KX-TDA200)
- 2.2.12 Wall Mounting (KX-TDA100)
- 2.2.13 Floor Standing (KX-TDA200 Only)
- 2.2.14 Surge Protector Installation
- 2.3 Installation of the Main Processing Card
- 2.4 Installation of the Trunk Cards
- 2.5 Installation of the Extension Cards
- 2.6 Installation of the Other Cards
- 2.7 Connection of Extensions
- 2.8 Connection of DECT Portable Stations
- 2.9 Connection of 2.4 GHz Portable Stations
- 2.10 Connection of Doorphones, Door Openers, External Sensors, and External Relays
- 2.11 Connection of Peripherals
- 2.12 Power Failure Connections
- 2.13 Starting the Hybrid IP-PBX
- Guide for the KX-TDA Maintenance Console
- Troubleshooting
- Appendix
- Index