D-Link DI-1162M - Manual (Page 112)

DI-1162/DI-1162M Remote Access Router
106
This is the same Software Update Menu as in the “PROM System Configuration” chapter’s Software Update
Menu. The parameters are described in that section.
Perform a System Restart after configuring these settings begins the software update procedure.
System Restart
The system restart function enables you to reset the DI-1162/DI-1162M without powering off. Some settings
changes require a system restart in order for them to take effect.
A system restart will not affect the router’s settings, but will clear all tables including the routing table and all
SNMP counters and tables. It is also used to initiate a software update.