D-Link DI-1162M - Manual (Page 117)

DI-1162/DI-1162M Remote Access Router
111
PROM System Configuration
The PROM program is run before the normal console (runtime) configuration program in the router’s Flash
Memory. Thus, the PROM System Configuration can be used if there are problems with the router’s console
program.
Specifically, the PROM Configuration program has procedures to initialize the administration parameters and the
LAN IP address of the router in order to allow the console software in the router’s flash memory to be replaced if
it has been damaged or deleted.
PROM System Menu
To enter the PROM System Menu, press Ctrl-C during the router’s POST procedure. The following menu will
appear: