D-Link DI-1162M - Manual (Page 45)

DI-1162/DI-1162M Remote Access Router
39
IPX Static Route
The parameters are described below:
♦
Network – This is the IPX network number.
♦
Next Node Address – This is the next node address of the device that the router will attempt to reach.
♦
Hops – This counts how many routers were passed through before the packet’s final destination on a network
was reached. The number of hops is part of each network entry in a RIP packet.
♦
Ticks – This is the time delay to reach a network. The number of ticks is part of each network entry in a RIP
packet. There are about 18 ticks in a second.
♦
Interface – Select the desired interface containing the gateway that the packets will be forwarded through.
♦
State – This enables or disables a particular entry.