Appendix b – specifications, General, Physical and environmental – D-Link DI-1162M User Manual
Page 129
DI-1162/DI-1162M Remote Access Router
123
Appendix B – Specifications
General
Network Protocols:
IP (Internet Protocol)
WAN Protocols:
PPP (Point-to-Point Protocol)
Multi-Link PPP, SLIP, HDLC, Frame Relay
Routing Protocols:
RIP 1 and RIP 2, DVMRP, IGMP, OSPF;
IPX and Bridge (DI-1162M only)
Management:
Local RS-232 Console Port (out-of-band)
Telnet (in-band)
SNMP MIB II and Enterprise MIB
Memory:
Flash Memory
System Memory
4MB
16 MB DRAM
No. of Ports and Type:
WAN
LAN
Add-on Module Slot:
2 DB-25 Ports
1 RJ-45 Port
1 LAN, 2 WAN, 1 ISDN (BRI)
WAN Interface:
2 EIA-530 DTE Ports
Async/sync, V.35, RS-232, RS-449
WAN Speeds (max):
Async
Sync
115.2 Kbps
T1/E1 (2.048 Mbps)
LAN Interface:
1 RJ-45 Port
10/100M Auto-negotiation
Full/Half Duplex Ethernet/Fast Ethernet
Physical and Environmental
Weight:
3.3 kg (7.26 lbs)
Dimensions (W x D x H):
441 x 236 x 55 mm
(17 x 9.3 x 2 inches)
Operating Temperature:
0
°
to 50
°
C
(32
°
to 122
°
F)
Humidity:
5% to 95% (non-condensing)
Power:
100 ~ 240 VAC
50 ~ 60 Hz
EMI:
FCC Class A, CE Mark Class A, BSMI
Class A, C-Tick Class A
Safety:
UL (1950), CSA (950)