D-Link DI-1162M - Manual (Page 122)

DI-1162/DI-1162M Remote Access Router
116
After the new runtime software has been downloaded, the router will automatically start up using the new software
with the Software Update Control setting disabled to avoid a downloading loop.
Factory Reset
Performing a factory reset erases all settings and tables. All configuration changes ever made to the router will be
deleted. The router will be set to the factory defaults it was shipped with and will no longer have an IP address.
Please make sure you wish to wipe out all settings and configure the router from scratch before you perform a
factory reset.
Execute Bootload
Choosing this option accepts the changes made in the PROM program and begins the router’s startup sequence.
Executing a bootload can also begin the Software Update procedure, if enabled.