AMETEK Compact i/iX Series - Manual (Page 113)

User Manual Compact i/iX Series
AMETEK Programmable Power California Instruments 113
5. Voltage Surge
9.4 Front Panel Operation -160
To perform a test from the keyboard, Press the MENU key several times until the
APPLICATIONS/OPTIONS Menu appears, select the APPLICATIONS screen. The APPLICATIONS
screen will appear as shown in Figure 9-1.
Figure 9-1: Application Menu
Scroll to the RTCA/DO-160D entry using the up and down cursor keys. Press the ENTER key to select
the RTCA/DO 160D main menu. The screen will appear as shown in Figure 9-2.
Note: The user has to turn on the Output relay before starting a test.
Figure 9-2: DO160 Main Menus
Prior to executing a test, selection of the desired test standard and group is required. Use the shuttle to
select the standard and the group if applicable.