AMETEK Compact i/iX Series Software Manual - Manual (Page 89)

User Manual - Rev H California Instruments
Avionics Software 89
4.4.2.7 Type III DC:
Test No. Section Subject Test Limits Comment File Ref.
5.0 Normal DC Steady State
5.3 Type 3 DC Voltage 22.0 to 32.8 Volts TYPE3-53
5.5 Voltage Ripple
5.5.1 Maximum Amplitude 4.0 Volts Peak to Peak Requirement fulfilled in 5.5.2
5.5.2 Ripple Components Per Figure 7 Use B787 DC ripple window to perform
6.0 Normal DC Transients
6.1 Voltage Transients Per Figures 8A through 8E TYPE3-61
6.2 Voltage Spikes Per Figure 10 Requires Additional Equipment
7.0 Abnormal DC Steady State
7.3 Type 3 DC Voltage 18.0 to 32.8 Volts TYPE3-73
8.0 Abnormal DC Transients
8.1 Voltage Transients Per Figures 9A through 9D TYPE3-81
SUPP Supplementary Transient Test Requirements Tests 1-65, Table 3.3.3-3A DC3SUPP-1
SUPP Supplementary Transient Test Requirements Tests 1-19, Table 3.3.3-3B DC3SUPP-2