AMETEK SFA Series Ethernet Programming - Manual (Page 21)

M550129-03 Rev K 2-1
SECTION 2
IEEE 488.2 GPIB/RS232
FEATURES, FUNCTIONS
AND SPECIFICATIONS
2.1 INTRODUCTION
This section introduces the features, functions and specifications for IEEE 488.2
GPIB and RS232.
2.2 FEATURES
•
16-bit programming and 16-bit readback of voltage and current
•
Programmable overvoltage protection with reset
•
IEEE 488.2 and SCPI compliant command set
•
User selectable Constant-Voltage/Constant-Current or Foldback mode,
with reset
•
Voltage Ramp and Current Ramp functions
•
Field-upgradable firmware via RS232
•
Soft calibration
•
Rear panel IEEE 488.2 and RS232 control interface
•
Rear panel configuration switch
2.3 PROGRAMMABLE FUNCTIONS
•
Output voltage and current
•
Soft limits for voltage and current
•
Overvoltage protection
•
Output enable/disable
•
Maskable fault interrupt
•
Hold and trigger
•
Full calibration