AMETEK SFA Series Ethernet Programming - Manual (Page 35)

SG Series Programming Ethernet Features, Functions and Specifications
M550129-03 Rev K 4-3
•
Soft limits for voltage and current
•
Overvoltage protection
•
Output enable/disable
•
Maskable fault interrupt
•
Hold and trigger
•
External relay control
•
Full calibration
4.2.3 Readback Functions
•
Measured voltage and current
•
Voltage and current settings
•
Soft voltage and current limits
•
Overvoltage protection setting
•
Status and Accumulated Status registers
•
Programming error codes
•
Fault codes
•
Manufacturer, power supply model, and firmware version identification
4.3 SPECIFICATIONS
(SUBJECT TO CHANGE WITHOUT NOTICE)
4.3.1 Ethernet/LAN Configuration
•
Ethernet Standard: IEEE-802.3 compliant
•
Technology: 10/100Base-T
•
Connection Monitoring: Media Sense supported
•
Protocol: TCP/IP, IPV4
•
ICMP (ping server): Enable (default)/Disable
•
IP Address Assignment: Automatic via DHCP (Primary default), Static,
or Automatic Private IP Addressing (Auto-IP, Secondary default)
•
VXI-11 Discovery: Supported
•
Security: Password protected access, and selective permissions for
each user
4.3.2 Ethernet Configuration Factory Defaults
PARAMETER DEFAULT
Host Name SGx<base model>-<last four digits of serial number>