AMETEK SLD Series - Manual (Page 34)

Operation Sorensen SLD-Series DC Load
3-6 M540075-01 Rev C
ON/OFF selections or value changes.
• The LED indicates the status of the Configuration function:
◦ lit = Configuration function is ON.
◦ not lit = Configuration function is OFF
15 LIMIT Key and ON/OFF LED
Scrolls among the parameters whose limits you can set.
• The Limit key sequentially selects the following parameters to program their
settings:
◦ upper Voltage limit
◦ lower Voltage limit
◦ upper Current limit
◦ lower Current limit
◦ returns to OFF and the loop repeats
• the Navigation keys, 13, are used with the Limit function to set the desired values.
• The LED indicates whether limits are being programmed or not:
◦ lit = Limit function isON.
◦ not lit = Limit function is OFF.
16 SHORT Key and ON/OFF LED
• The SHORT key toggles the short circuit of the input terminal On and Off.
• LED indicates the ON/OFF status of the short circuit
◦ lit = ON
◦ not lit = OFF
17 DUAL V/A Key and ON/OFF LED
This key is used to display the dual voltage or current.
• DUAL V/A scrolls in the following sequence:
◦ Voltage for Channel A in upper display (7) and for Channel B in lower display (8)
◦ Current for Channel A in upper display and for Channel B in lower display
◦ returns to OFF and the loop repeats
• The LED indicates whether or not the digital meter is displaying dual voltage or
current for channels A and B.
◦ lit = dual voltage or current is being displayed in the digital meter display
◦ not lit = OFF
• Associated LEDs:
◦ V = Value displayed is in Volts
◦ A = Value displayed is in Amps