AMETEK SLH Series RevC - Manual (Page 86)

Appendix B Sorensen SLH-Series DC High Power Electronic Load
B-2 M540074-01 Rev C
• T BNC connector QTY = (n-2) × 2
The T-type BNC connects the current programming and the current summing BNC
between the slave units when two or more are configured.
• BNC to BNC cable (14cm) QTY = (n-1) × 2
Connect the interload units for current programming and current summing.
• Power cord for Master and Slave unit QTY = (n)
Connects to AC line input, providing the working power to the load unit.
B.2.2 Recommended Items (not included in system kit)
• AC Power Strip QTY = n / 4
To control AC power ON/OFF simultaneously
• External Power Switch QTY = 1
To turn ON or OFF the master/slave load system
• System Cabinet QTY = 1
19”-wide rack-mount cabinet with horizontal mounting rails, to house all loads
Recommend 24” (600mm) depth x number of base loads at 7” height each