Artesyn COMX-P40x0 ENP2 Installation and Use (August 2014) - Manual (Page 114)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95B) 114
An exception for frame manager network ports is when the nfsboot, which is the network port
for mounting NFS, remains "ethX" and will not be renamed to "fmY-gbZ" in Linux because the
udev cannot rename the device that is currently busy.
For network ports of PRO/1000, the port name is always "ethX".
7.21 Build BSP Images
Output Directory
By default, the output directory for building BSP images is /local/tmp/.You need to create this
directory and provide full privileges for all users to access. Use the following commands to
create directory and provide privileges:
sudo mkdir -p
sudo chmod a+rwx /local/ /local/tmp/
Build a Release
To build a release, run the ./build.sh <Version_Number> command.
FM2 Network Ports
Port 0 (FM2@DTSEC1) is named as fm2-gb1
Port 1 (FM2@DTSEC2) is named as fm2-gb2
Port 2 (FM2@DTSEC3) is named as fm2-gb3
Port 3 (FM2@DTSEC4) is named as fm2-gb4
Port 4 (FM2@TGEC1) (XAUI) is named as fm2-10g
Table 7-11 UDEV Rules for Network Ports in Linux (continued)
FM1 Network Ports
The version number is formatted as VxxxAxx, VxxxBxx, VxxxTxx or VxxxRxx. For example:
V100B00.