Artesyn COMX-P40x0 ENP2 Installation and Use (August 2014) - Manual (Page 92)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95B) 92
3. Kernel version
 The version can be viewed in the loading kernel message:
## Booting kernel from Legacy Image at XXXXXXXX ...
Image Name: Linux-2.6.34.6
Created: 2010-11-29 8:46:16 UTC
 Run ’iminfo $norbootaddr’ in U-Boot
=> iminfo $norbootaddr
## Checking Image at ee000000 ...
Legacy image found
Image Name: Linux-2.6.34.6
Created: 2010-11-29 8:46:16 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 3520445 Bytes = 3.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
 In the kernel boot-up message:
Linux version 2.6.34.6 ([email protected]) (gcc
version 4.3.2 (Sourcery G++ Lite 4.3-74) ) #1 SMP Mon Nov 29
16:46:03 CST 2010
4. U-Boot Version
 Run the command "version" after the first line lf the U-Boot boot-up message
=> version
U-Boot 2010.06-COMX_P4080_V100R00 (Nov 29 2010 - 16:24:12)
5. JFFS2 rootfs version
 In the U-Boot, boot with nanboot (’run nandboot’). In Linux, run ’cat /etc/.version’
[root@COMX-P4080 root]# cat /etc/.version
COMX-P4080 JFFS2 ROOTFS for nand.full FLASH ver:
COMX_P4080_V100R00 build by [email protected] on
Mon Nov 29 08:47:50 UTC 2010