Artesyn PrAMC-7211 PNE3.0 Software Installation Guide (June 2014) - Manual (Page 59)

PrAMC-7211 Software Installation
PrAMC-7211-PNE3.0 Software Installation Guide (6806800L07B) 59
Starting sshd:
[ OK ]
Starting xinetd: [ OK ]
Starting enterprise event log notification: [ OK ]
Starting crond: [ OK ]
Starting notification action daemon: [ OK ]
Starting atd: [ OK ]
Wind River Linux release 3.0.2
Kernel 2.6.27.39-pramc-7211-pne-3.0.2.1 on x86_64 (console)
PrAMC-7211 login:
2.4 Booting Via Network
The PrAMC-7211 can be booted as diskless client from a boot server using pxeboot. In order to
configure the PrAMC-7211 accordingly, follow the steps mentioned below:
1. Setup DHCP configuration, see Setting Up DHCP Configuration on page 36 .
2. Modify the contents of PrAMC721x-WR-3.0-BBS-RM01-
1.0.2/usb/pxelinux.cfg/default
file
From
TIMEOUT 50
DEFAULT kernel initrd=minrootfs.cpio.gz rdinit=/linuxrc
console=ttyS0,9600n8 INTF=front
TFTPSERVER=192.168.2.20:/PrAMC721x-WR-3.0-BBS-RM01-1.0.2/usb
DHTMOUT=6 TIMEOUT=16