Artesyn PrAMC-7211 PNE3.0 Software Installation Guide (June 2014) - Manual (Page 62)

Firmware Upgrades
PrAMC-7211-PNE3.0 Software Installation Guide (6806800L07B) 62
BANK : A
Firmware Name : Phoenix BIOS
Firmware Version : 1.8
Marked for next use : yes
BANK : B
Firmware Name : Phoenix BIOS
Firmware Version : 1.8
Marked for next use : no
********************[[[[[ REPORT END ]]]]]********************
Note that Bank A has been marked for next use and it is the bank which boots up next time
on a reboot.
The bank which is marked for next use may not be the current booted bank. It is true unless
and until user marks the other bank for next use.
2. Run the upgrade tools with the commands given below to upgrade the inactive bank (bank
B in the example given above). Note that marked for next boot may not be the actual active
bank. Fcu knows which is the inactive bank and it does not rely on the marked bank for next
boot field. Fcu always upgrades the inactive bank. You can expect he below given output
for the upgrade operation.
export PATH=$PATH:/opt/motorola/bin
fcu -uf /opt/motorola/rom/pramc-7211-cpu.fri
Where:
u - upgrade
f - file
/opt/motorola/rom/pramc-7211-cpu.fri
- the upgrade image
fcu -h
- provides the help menu