Artesyn RTM-ATCA-736x-DD Installation and Use (June 2014) - Manual (Page 45)

Chapter 4
RTM-ATCA-736X-DD Installation and Use (6806800L82C) 45
Mechanical and Connector Information
4.1 Specifications
This section provides mechanical, electrical, environmental, and other relevant information.
4.1.1 Physical Dimensions
The RTM-ATCA-736X-DD is an 8U (355.6 mm) height board with 80 mm depth for standard
applications. It complies with PICMG 3.0 Revision 3.0 specification. The RTM-ATCA-736X-DD is
keyed to conform to the PICMG 3.0, Keying of ATCA Boards and Backplanes specification.
4.1.2 Weight
The weight of the RTM-ATCA-736X-DD is listed below.
4.1.3 Power Requirements
There are several manufacturing options for the RTM. Be sure to validate that the host chassis
can supply the RTM slot with these maximum current requirements. See
Table "Maximum RTM
Module Current Requirements" on page 25 .
Table 4-1 RTM-ATCA-736X-DD Weight
Description
RTM-ATCA-736X-DD (No
disks) RTM-ATCA-736X-DD (Dual disks
installed)
RTM Board 570 g 1000 g
RTM board in shipping box 1125 g 1555 g