Artesyn RTM-ATCA-736x-DD Installation and Use (June 2014) - Manual (Page 61)

IPMI Functions List
RTM-ATCA-736X-DD Installation and Use (6806800L82C) 61
5.4.1 Disk IPMI ’raw’ Commands
The MMC on the RTM includes several custom commands developed to facilitate management
of the Hard Disk Assemblies (DCA). Please consult your ATCA carrier or shelf documentation for
the exact syntax to send a raw command, as it will vary with each ATCA supplier.
Get FRU Inventory Area Info 28.1 Storage 10 h Mandatory
Read FRU Data 28.2 Storage 11 h Mandatory
Write FRU Data 28.3 Storage 12 h Mandatory
AdvancedTCA™ Commands
Get PICMG Properties 3-9 PICMG 00 h Mandatory
FRU Control 3-22 PICMG 04 h Mandatory
Get FRU LED Properties 3-24 PICMG 05 h Mandatory
Get LED Color Capabilities 3-25 PICMG 06 h Mandatory
Set FRU LED State 3-26 PICMG 07 h Mandatory
Get FRU LED State 3-27 PICMG 08 h Mandatory
Get Device Locator Record ID 3-29 PICMG 0D h Mandatory
AMC® Commands
Set AMC Port State 3-27 PICMG 19 h Mandatory
Get AMC Port State 3-28 PICMG 1A h Mandatory
Table 5-4 Supported IPMI Commands (continued)
Command
IPMI/PICMG
/AMC Spec
NetFn CMD MMC Req