Avery Dennison 6037 Rev.AC 9/03 - Manual (Page 11)

Using Memory Cards 2-1
U S I N G M E M O R Y C A R D S
You can use an AT-Attachment (ATA) memory card with the
appropriate device drivers to add memory to the printer. The
card goes in the printer’s PC-card slot. The application treats
the memory card as another disk drive.
Memory cards are flash-based. They have a built-in processor
to track bad locations and maximize flash life (ensuring no
location is overused). Available memory cards come in 32, 64,
and 128 MB sizes.
C o n f i g u r i n g M e m o r y C a r d s
The following procedure describes how to configure memory
cards. Refer to the Programmer’s Manual for more information.
1. Place the following files (located in
c:\dosultra\images\memcard) in the application’s root
directory:
Name Description
ATAINIT.EXE Memory card partition utility.
GENATA.CLB Generic configuration library for the memory
card.
CSALLOC.INI Initialization file for CSALLOC.EXE.
CARDID.INI Initialization file for CARDID.EXE. This file
contains references to configuration libraries
(.CLB files) for the memory card. At a
minimum, this file must refer to GENATA.CLB.
2