Avery Dennison 6037 Rev.AC 9/03 - Manual (Page 13)

Using Radio Cards 3-1
U S I N G R A D I O C A R D S
You can use a radio card with the appropriate device drivers to
enable a printer to run radio-frequency (RF) communications,
which allow the printers to use wireless radio networks. The
card goes in the printer’s PC-card slot.
Following are the available radio cards:
♦ Cisco 802.11B
♦ Symbol® Spectrum 24 802.11
W r i t i n g a R a d i o - E n a b l e d A p p l i c a t i o n
Write the application, integrating Datalight® Sockets® API
commands into the application code. See the Datalight Sockets
Developer’s Guide for more information.
When you link the application, include lmsdlskt.lib.
N o t e s
♦ Be sure to write power management for the radio into the
application (this is separate from printer power
management).
♦ Do not make broadcast messages or respond to them.
♦ Make sure the radio is not pinging or responding to all
access points in an area. This action drains the battery
quickly.
3