Dot Hill Systems II 200 FC User Manual
Page 114
7-6 SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005
1. From the Main Menu, choose view and edit Event logs to view the event logs.
A log of recent events is displayed.
Note –
The controller can store up to 1000 event log entries. The event log records
configuration and operational events as well as error messages and alarm events.
2. Use your arrow keys to move up and down through the list.
3. To clear events from the log after you have read them, use your arrow keys to move
down to the last event you want to clear and press Return.
A Clear Below Event Logs? confirmation message is displayed.
4. Choose Yes to clear the recorded event log entries.
Note –
Resetting the controller clears all recorded events. To retain event log entries
after controller resets, you can install and use the SANscape program.