Dot Hill Systems II 200 FC - Manual (Page 203)

Appendix I Configuring an HP Server Running the HP-UX Operating System I-9
2. To include the file system created in the example, add the following line to the file
/etc/fstab
:
Refer to the entry for fstab(4) for details about creating /etc/fstab entries.
3. To check to see if fstab was set up correctly, type:
If the mount point and the fstab file are correctly set up, no errors are displayed.
4. To verify that the file system is mounted and list all mounted file systems, type:
5. To unmount the file system, type:
I.12 Determining the Worldwide Name for HP-UX
Hosts
Before you can create host filters, you need to know the worldwide name (WWN) for
the FC HBA that connects your host to your FC array.
For supported HP-UX host HBAs, follow these steps:
1. Determine the device name by typing the command:
/dev/vg0mynewvg/lvol1 /usr/local/myfs vxfs delaylog 0 2
# mount -a
# bdf
# umount /usr/local/myfs
# ioscan -fnC fc