Dot Hill Systems II 200 FC - Manual (Page 172)

F-2 SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005
Note –
A DB9-to-DB25 serial cable adapter is included in your package contents for
connecting the serial cable to a DB25 serial port on your host if you do not have a DB9
serial port.
2. Power up the array.
3. On the server, choose Start → Programs → Accessories → Communications →
HyperTerminal.
4. Type a name and choose an icon for the connection.
5. In the Connect To window, select the COM port from the Connect using: drop-down
menu for that array.
6. Click OK.
7. In the Properties window, set the serial port parameters using the drop-down menus.
Set serial port parameters to:
■
38,400 baud
■
8 data bits