Beurer BM 85 - Manual (Page 21)

21
• Avoid any mechanical restriction, compression or bending of
the cuff line.
• Do not allow sustained pressure in the cuff or frequent meas-
urements. The resulting restriction of the blood flow may
cause injury.
• Make sure that the cuff is not placed on an arm in which the
arteries or veins are undergoing medical treatment, e.g. in-
travascular access or intravascular or therapy, or an arterio-
venous (AV) shunt.
• Do not use the cuff on people who have undergone a mas-
tectomy.
• Do not place the cuff over wounds as this may cause further
injury.
• Please note that data transfer and data storage is only pos-
sible when your blood pressure monitor is supplied with
power. As soon as the battery is empty, the blood pressure
monitor loses the date and time setting.
• To conserve the battery, the blood pressure monitor switches
off automatically if you do not press any buttons for 3 minutes.
• The device is only intended for the purpose described in
these instructions for use. The manufacturer is not liable for
damage resulting from improper or careless use.
Instructions for storage and maintenance
• The blood pressure monitor is made from precision and elec-
tronic components. The accuracy of the measurements and
service life of the device depend on its careful handling:
– Protect the device from impacts, humidity, dirt, marked
temperature fluctuations and direct sunlight.
– Do not drop the device.
– Do not use the device in the vicinity of strong electromag-
netic fields and keep it away from radio systems or mobile
telephones.
– Only use the cuff included with the delivery or original
replacement parts. Otherwise incorrect measurements will
be recorded.
• Do not press the buttons before the cuff is placed on the arm.
Notes on batteries
• Swallowing batteries can be extremely dangerous. Keep the
batteries and products out of the reach of small children. If a
battery has been swallowed, seek medical attention immedi-
ately.
• Batteries must not be taken apart, thrown into an open fire or
short circuited.
The codes below are printed on batteries
containing harmful substances:
Pb: battery contains lead,
Cd: battery contains cadmium,
Hg: battery contains mercury.
Instructions for repairs and disposal
• Do not repair or adjust the device yourself. Proper operation
can no longer be guaranteed in this case.
• Repairs must only be carried out by Customer Services or
authorised suppliers.
• Do not open the device, except during disposal. In this case,
remove the installed battery. Failure to comply will invalidate
the warranty.