Beurer GL 50 (mg/dL) - Manual (Page 12)

12 Beurer GL50 mg/dL
3.2 Lancing device and lancet needles
1 AST cap (transparent)
2 Cap
3 Protective lancet disc
4 Sterile lancet needles
5 Lancet holder
6 Dial for setting
different penetration depths
7 Tensioning slider
8 Trigger
3.3 USB cover
If you would like to use the blood glucose monitor
without the integrated lancing device, you can use
the supplied USB cover in place of the lancing
device.
3.4 Display symbols
1 Speaker symbol
2 Temperature symbol
3 Replace battery symbol
4 Time
5 Date
6 Measured value display, HI, LO display,
average blood glucose value, ERR, USB
7 Symbols for labelling measurements
8 Memory symbol
9 Test strip and blood droplet symbol
10 Blood glucose unit mg/dL
11 Blood glucose unit mmol/L –
not functional
Note
To read the measured values correctly, the underline must be below the measured values.
Note
The blood glucose monitor is supplied with the following basic settings:
• Blood glucose unit: mg/dL
• Acoustic signal on
• Backlighting on