Beurer GL 50 (mg/dL) - Manual (Page 29)

Beurer GL50 mg/dL 29
6.2 Displaying average blood glucose values
You can display the average measured blood glucose value from the last 7, 14, 30 and 90 days.
1 Switch the monitor on using the on/off button [1]. The initial display is shown briefly. Press
the “+” rocker switch twice [3].
The measurement unit of the blood glucose value, “ ” and the average value are displayed
(this means: 07 = 7, d = days).
2 Press “+” repeatedly to display the average value for 7, 14, 30 and 90 days.
3 You can cancel the process at any time. To do so, press the ON/OFF button or wait until the
device switches itself off automatically after two minutes.
1 Number of days, e.g. 7, for which the average value is calculated
2 Number of saved values used to calculate the average, e.g. 8
3 Average value
6.3 Displaying average blood glucose values for labelled values
You can display the average measured blood glucose value for labelled values from the last 7, 14,
30 and 90 days.
1 Switch the monitor on using the on/off button [1]. The initial display is shown briefly. Press
the “+” rocker switch twice [3].
The measurement unit of the blood glucose value, “ ” and the average of all measured
values are displayed (this means: 07 = 7, d = days).