7 remix, 8 pfl & solo clear, 9 pfl & solo hold – Cadac C-Type User Manual
Page 34: 10 playback to tb, 11 playback to monitor, 12 pre/post fader, 13 insert, 14 pfl
4-4
Stereo group & Playback Module 8064
C-Type
Revision C2005-2
7141:
5HPL[
Pressing this button changes the console from microphone inputs to line inputs. This
means the console goes from record mode to playback the multi-track tape mode.
7141;
3)/#)#62/2#&OHDU
In normal operation the PFL & SOLO busses function in ‘intercancel mode’ where
each new selection cancels any active PFL or SOLO selections. The CLEAR button
is illuminated if a PFL or SOLO is active and may be used to cancel the current
selection.
7141<
3)/#)#62/2#+ROG
If the HOLD button is pressed, each new PFL or SOLO selection is mixed with the
existing selection.
714143 3OD\EDFN#WR#7%
Pressing these buttons selects the STEREO returns from either recorder A or
recorder B to the TalkBack system. The feature is intended for enabling click track or
tempo information to be heard via the TalkBack.
714144 3OD\EDFN#WR#0RQLWRU
Pressing these buttons selects the STEREO returns from either recorder A or B to
the monitor system.
714145 3UH23RVW#IDGHU
This button is used to select the insert point PRE or POST fader.
714146 ,QVHUW
Press this button to select Insert IN.
714147 3)/
This electronically latching button is under control of the HOLD and CLEAR function
(see previous page) and allows pre-fader checking of the stereo channel.