10 osc or png to stereo, 11 png on, 12 sine wave frequency select – Cadac C-Type User Manual
Page 54: 13 osc/png on, 14 producer tb phantom power on, 15 reverse tb2 phantom power on, 16 reverse tb2 on, 17 md reverse tb phantom power on, 18 md reverse tb on, 19 led meter
7-4
OSC, PNG & Communications Module 7913
C-Type
Revision C2005-2
:14143 2VF#RU#31*#WR#6WHUHR
Press this button to route the selected output of the internal Oscillator or PNG to the
Stereo-section of the console.
:14144 31*#21
When pressed, this button selects Pink Noise generator ON provided the Oscillator/
PNG ON-button has been pressed.
:14145 6LQH#ZDYH#IUHTXHQF\#VHOHFW
When pressed, these four buttons selects pre-set sine wave frequency as indicated
on the panel.
:14146 2VF231*#21
Press this button to switch the OSC/PNG ON.
:14147 3URGXFHU#7%#3KDQWRP#SRZHU#21
Press this button to switch the Phantom power for the Producer talkback microphone
ON.
:14148 5HYHUVH#7%5#3KDQWRP#SRZHU#21
Press this button to switch the Phantom power for the TB2 input ON.
:14149 5HYHUVH#7%5#21
Press this button to switch the Reverse TB2 input ON. This input is a microphone
level input and the microphone used should be equipped with a switch to short
together two control wires in order to ‘open’ the microphone signal path in the desk.
See chapter 8 for connection details for the TB2 connector.
:1414: 0'#5HYHUVH#7%#3KDQWRP#SRZHU#21
Press this button to switch the Phantom power for the Music Directors talkback ON.
:1414; 0'#5HYHUVH#7%#21
Press this button to switch the input for the Music Directors talkback ON. This feature
can be controlled via an external control box (option). It is enabled from this module.
:1414< /('#PHWHU
20-segment LED-meter indicating the output level from the OCS/PNG.