Cadac C-Type - Manual (Page 52)

7-2 OSC, PNG & Communications Module 7913
C-Type Revision C2005-2
:14 26&231*#)#&RPPXQLFDWLRQV#PRGXOH#:<46#0#
IURQW#SDQHO
:1414 7;9#PRQLWRU
This LED provides monitoring indication of the 48V supply voltage.
:1415 .4;9#PRQLWRU
This LED provides monitoring indication of the +18V supply voltage.
:1416 04;9#PRQLWRU
This LED provides monitoring indication of the -18V supply voltage.
:1417 469#PRQLWRU
This LED provides monitoring indication of the 13V supply voltage.
:1418 ,QSXW#7%#PLFURSKRQH
This balanced XLR input is intended for an Engineer’s talkback microphone.
:1419 3KDQWRP#SRZHU#21
Press this button to switch ON the 48V phantom power.
7.1.1 48V monitor
7.1.2 +18V monitor
7.1.3 -18V monitor
7.1.4 13V monitor
7.1.5 Input TB microphone
The wiring convention is:
PIN 1 = Screen
PIN 2 = + phase (hot)
PIN 3 = – phase (cold)
7.1.6 Phantom power ON