Caple C736GSS - Manual (Page 13)

GENERAL TIPS
<
Before cleaning the hob switch if off and wait for it to cool down.
<
Clean with a cloth, hot water and soap or liquid detergent.
<
Do not use products which are abrasive, corrosive or chlorine based.
<
Do not use steel pads.
<
Do not leave acid or alkaline substances (vinegar, salt, lemon juice, etc.) on the
hob.
ENAMELLED PARTS
<
All the enamelled parts must be washed only with a sponge with soapy water or
other non-abrasive products.
<
Dry carefully.
STAINLESS STEEL
<
Clean with special products which are available on the market.
<
Dry preferably with chamois leather.
<
Note: regular use will cause discolouring around the burners and the electric
hotplate, because of the high temperature.
BURNERS AND GRIDS
<
These pieces can be removed and washed with suitable products.
<
After cleaning burners and spreaders dry them well and replace them
correctly.
<
In appliances with electric ignition keep the electrode clean so that the sparks
always strike.
<
Note: To avoid damage to the electric ignition do not use it when the burners
are not in place.
GAS TAPS
<
Regular lubrication on the gas taps must only be performed by specialised
engineers.
<
If the gas taps are not working properly call the After-Sales Service.
ELECTRIC HOTPLATES
<
Always clean when the hotplate is tepid.
<
Use a soft cloth, dampened with water, and a little salt. To finish off, use a soft
cloth with a little oil.
13
3. CLEANING AND MAINTENANCE