Caple C736GSS - Manual (Page 8)

USE OF THE GAS BURNERS
Gas flow to the burners is adjusted by turning the knob illustrated in fig. 5 which
controls the safety valves.
Turning the knob so that the indicator line points to the symbols printed on the panel
achieves the following functions:
3 full circle = closed valve
3 symbol = maximum aperture or flow
3 symbol = minimum aperture or flow
The maximum aperture position permits rapid boiling of liquids, whereas the
minimum aperture position allows slower warming of food or maintaining boiling
conditions of liquids.
To reduce the gas flow to minimum, rotate the knob further anti-clockwise to point
the indicator towards the small flame symbol.
Other intermediate operating adjustments can be achieved by positioning the
indicator between the maximum and minimum aperture positions, not between
maximum aperture and closed positions.
LIGHTING OF BURNERS
To light one of the gas burners, hold a flame (e.g. a match) close to the top part of
the burner, push in and turn the relative knob (fig. 5) in an anti-clockwise direction,
pointing the knob indicator towards the large flame symbol (i.e. max gas flow).
Models fitted with electric spark lighter button.
On these models, to light one of the burners you have to push in and turn the
relative knob (fig. 5) to the maximum aperture position (large flame symbol) and
press the electric lighter button (fig. 6) until the flame has been lit.
Adjust the gas valve to the desired position.
8
2. USE
·
"
”
"
"
”
"
Figure 5 Figure 6