Compuprint 4247-L03 Quick Start - Manual (Page 20)

Software Driver Selection
At this point it is necessary to configure your printer for your application package.
The installation procedures depend upon the host environment.
In a WINDOWS environment the printer supports the Plug & Play feature.
Power Connection
DANGER
<1-11> Your country may require an approved power cord and plug.
Ensure that you have the correct power cord and plug. Use this cord
and plug only with an approved, correctly-installed power receptacle.
1. Make sure the power outlet is near the printer location and easily accessible.
2. Make sure that the power switch is in 0 position (OFF).
3. Insert the power cable plug into the printer connector and the other power
cable end into a convenient outlet.
1 2
HC0I0014
Figure 12. Inserting the power cable plug into the printer connector and the other power
cable end into a convenient outlet.
12 Quick Setup Guide