Comtech EF Data CDM-625 - Manual (Page 211)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–19
6.5.4.2.3 Admin | Firmware Pages
Chapter 4. UPDATING FIRMWARE
Click the Base Modem tab, or when the optional IP Packet Processor card is installed, the Packet
Processor tab to continue.
6.5.4.2.3.1 Admin | Firmware | Base Modem
Use this page to view the scrollable, read-only status windows that provide information about
the basic unit’s two loaded and operational firmware images.
Figure 6-8. Admin | Firmware | Base Modem page
Boot
This window identifies the firmware number, version, and release date that is loaded upon
power-up/boot up of the unit.
Image 1 / Image 2
These scrollable windows identify the Firmware numbers, versions, and release dates that
comprise the aggregate image load.