Comtech EF Data CDM-625 - Manual (Page 217)

CDM-625 Advanced Satellite Modem Revision 15
Ethernet-based Remote Product Management MN-CDM625
6–25
6.5.4.3.2 Configuration | LAN Pages
Click the IP tab, or – when the optional IP Packet Processor card is installed and enabled – the
ARP tab to continue.
6.5.4.3.2.1 Configuration | LAN | IP
Figure 6-14. Configuration | LAN | IP page
Network Configuration
• Ping Reply – Use the drop-down list to select Ping Reply as Disabled or Enabled. When
Enabled, the modem responds to ICMP ping requests.
• MAC Address – This parameter is read-only and cannot be changed.
• WAN Buffer Length – Enter a value between 20ms and 400ms, in 20ms increments.