Comtech EF Data MCED-100 - Manual (Page 45)

MCED-100 MetaCarrier Embedding Device Revision 1
Rear Panel Connectors and Pinouts MN-MCED100
3–9
3.6.2 Alternating Current (AC) Power Interface (Standard)
Figure 3-5. MCED-100 AC Power Interface
3.6.2.1 AC Operation (Standard) – Applying Power
Figure 3-6. Applying AC Power
To apply AC power to the MCED‐100:
• First, plug the provided AC power cord female end into the unit.
• Then, plug the AC power cord male end into the user‐supplied power source.
• Finally, switch the unit ON.
Feature Description
1 On / Off Switch
2 Press-fit Fuse Holder
3 IEC Three-prong Connector
AC Power Specifications
Input Power 40W maximum, 20W typical
Input Voltage
100V to 240V AC, +6%/-10%, autosensing
(Total absolute max. range is 90V to 254V AC)
Connector Type IEC
Fuse Protection
Line and neutral fusing :
(2X) 120/240VAC T2A 5x20mm slow-blow type fuses