A.5 scenario 4: complete interference – Comtech EF Data MCED-100 User Manual
Page 91

MCED-100 MetaCarrier Embedding Device
Revision 1
Appendix A
MN-MCED100
A–5
A.5
Scenario 4: Complete Interference
Item
Description
A
“Desired” 256 ksps Data Carrier
B
“Interfering” 3.5 Msps Data Carrier
Figure A-4. Scenario 4 (Complete Interference)
In this complete interference scenario (Figure A‐4), the energy of the interfering carrier is
significant. As shown here, the 3.5 Msps carrier completely interferes with the 256 ksps carrier:
the interference is total.
When the carriers have Carrier ID technology enabled, the MCxD‐100 may be instructed to look
in the spectrum below the composite envelope to determine if Carrier IDs are present.
Once an interfering carrier is found, the uplinking station may be contacted and a request made
to disable the identified transmission service.