Comtech EF Data LPODnet - Manual (Page 23)

LPODnet M&C Netbook Accessory Revision 3
Setup MN-LPODNET
2–3
2.2 Connecting the LPODnet to the SSPA Using the CA-0000352 Ethernet
Interface Cable
The Figure 2-4 diagram shows the connections for the CA-0000352 Ethernet Interface Cable. The
cable’s RJ-45 ends (labeled ‘J2’ and ‘J3’) connect either to the LPODnet Netbook or to a user-
provided Ethernet switch or hub. The ‘P1’ 19-pin circular connector end connects to either the
SSPA’s ‘J6 | COM1’ port in standalone applications, or the 1:1 Redundant Loop Cable Assembly’s
‘J1’ receptacle in 1:1 redundancy applications.
Figure 2-4. CA-0000352 Cable Connections Diagram