Comtech EF Data LPODnet User Manual
Page 26
LPODnet M&C Netbook Accessory
Revision 3
Setup
MN-LPODNET
2–6
2.2.2.1
Circular Connector Connection for Standalone Applications
For standalone configurations, the CA-0020526 Serial Interface Cable connects
directly between the CLC-10 and the SSPA.
Connect the CA-0020526 Serial Interface Cable’s 19-pin circular connector to the SSPA’s
‘J6|COM1’ port as per the steps described in Sect. Error! Reference source not found., and as
shown in Figure 2-8.
Figure 2-8. LPODnet to SSPA Connection – Standalone Applications
2.2.2.2
Circular Connector Connection for 1:1 Redundancy Applications
Before proceeding, you should review Appendix A. 1:1 REDUNDANCY in Comtech EF
Data’s LPOD
Outdoor Amplifier / Block Up Converter (BUC) Installation and
Operation Manual (CEFD P/N MN-LPOD) or the SPOD Outdoor Amplifier
Installation and Operation Manual (CEFD P/N MN-SPODPSX).
Figure 2-9. CA-0000352 Cable Connection for SSPA 1:1 Redundancy System