Comtech EF Data LPODnet - Manual (Page 50)

LPODnet M&C Netbook Accessory Revision 3
Ethernet-Based M&C using the LPODnet MN-LPODNET
3–20
3.6.4.3.2 Config | LNB (LPOD Only)
The ‘Config | LNB’ page is not applicable to SPOD operations.
Use this page to configure the LPOD’s Low-Noise Block Downconverter parameters, and display
the LNB status for L-Band operation.
Figure 3-7. Config | LNB Page