Comtech EF Data LPODnet - Manual (Page 34)

LPODnet M&C Netbook Accessory Revision 3
Ethernet-Based M&C using the LPODnet MN-LPODNET
3–4
MIB2 SNMPv1 trap: Authentication Failure 5
MIB2 SNMPv2 notifications: Authentication Failure 1.3.6.1.6.3.1.1.5.5
For a list of the Faults v1 Traps / v2 Notifications supported by the SSPA, see Sect. 4.3.3 SNMP
Traps in Chapter 4. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT in the pertinent SSPA
manual (CEFD P/N MN-LPOD or MN-SPODPSX).
3.5 SSPA Telnet Interface
The SSPA provides a Telnet interface for the purpose of equipment M&C via the standard
Remote Control protocol.
Tera Term, a freeware Telnet Client, is provided on the USB Flash Drive (CEFD P/N PP-0000138)
that is included with the CEFD LPODnet Accessory Kit (CEFD P/N KT-0000203); otherwise, a
preferred, user-provided interface may be installed onto the LPODnet.
The Telnet interface requires user login at the Administrator level and Read/Write level. An
example of the login process is shown here:
Once logged into the Telnet interface as the Administrator, you can access the standard remote
control interface defined in Chapter 5. SERIAL-BASED REMOTE PRODUCT MANAGEMENT, in the
pertinent SSPA manual (CEFD P/N MN-LPOD or MN-SPODPSX).