Comtech EF Data CPA - Manual (Page 89)

CPA C-Band Indoor Solid State Power Amplifier Revision 1
Ethernet-based Remote Product Management MN/CPA-IN.IOM
6–13
The active session terminates if the unit remains idle (i.e., when no user activity occurs) beyond
the assigned Webpage Timeout. A valid user name and password is then required to resume the
ISSPA Web Server Interface session.
6.4.4.2.2 Admin | SNMP
The Administrator must use this page to manage the ISSPA SNMP (Simple Network Management
Protocol) settings.
Figure 6-5. Admin | SNMP page
SNMP
• Simple Network Management (Operational Status) – Use the drop-down list to select the
operational setting as Enabled or Disabled.
• The SNMP Read and Write Community String fields can be any combination of characters
and a length of 0-20 characters:
o The factory default Read Community String is public.
o The factory default Write Community String is private.
• Enable Authentication Trap (Operational Status) – Use the drop-down list to select the
operational setting as Enabled or Disabled.
• The Administrator can assign up to two SNMP Trap IP addresses and one SNMP Trap
Community String. The SNMP Trap Community String field can be any combination of
characters and a length of 0 - 20 characters: