Comtech EF Data CPA - Manual (Page 93)

CPA C-Band Indoor Solid State Power Amplifier Revision 1
Ethernet-based Remote Product Management MN/CPA-IN.IOM
6–17
6.4.4.3.2 Config | Utility
Use this page to configure CPA operating parameters.
Figure 6-7. Config | Utility page
Click [Refresh] to update the page with its latest operating parameters.
Date
Enter a date in the form MM/DD/YY (where MM = month [01 to 12], DD = day [01 to 31], and YY
= year [00 to 99]).
Time
Enter a time in the form HH:MM:SS (where HH = hour [00 to 23], MM = minutes [00 to 59], and
SS = seconds [00 to 59]).
Click [Change Date/Time] to save.
Forward / Reverse RF Power Monitor Offset (dBm)
For either, enter an offset value (in dBm) from -6.0 to +6.0, and then click [Change Offsets] to
save.
Circuit ID
Enter a Circuit ID string of up to 48 characters, and then click [Change CID] to save.