3 redundancy, Standard features -1, Redundancy -2 – Comtech EF Data CMR-8500 Manual User Manual
Page 18: Configuration -3, Operation -3

CMR-8500 DVB IP ENCAPSULATOR
Revision 2
Chapter 1 Introduction
MN-CMR8500
1-2
• Program Specific Information (PSI) - PAT/PMT support
or security
n
d configuration):
for remote field software/firmware upgrade
Figure 1-2. CMR-8500 DVB IP Encapsulator
1.3
Redundancy
• IGMP for Multicast Route Announcements
• Configurable Telnet, FTP, and HTTP ports f
• Color LEDs for status monitoring and rapid fault isolatio
• Support for 802.1Q VLAN Tags
• Management (monitor, control an
•
Web Interface
•
FTP and TFTP
•
SNMP V2 (Private and MIB II) Support
• Multicast Zones
Figure 1-3. CMR-8500 Redundant System
The CMR-8500 support
matic failover in the event of a
s a 1:1 redundant configuration, providing for auto
failure of the primary encapsulator. For networks with high availability demands, the redundant system
provides a cost effective solution.